750 mL Round 18.5 mm Bar Top Chicago

SKU: HIQ-2122 Category:
Make & Model
MoldL999FT
ModelChicago
StyleRound
Base TypeFlat Bottom
MaterialGlass
Surface TreatmentTin & Poly
Tamper EvidentNo
Country of OriginChina

 

Color & Finish
ColorExtra Flint
Finish TypeBar Top
Finish Spec18.5 mm

 

Capacity
Capacity – Metric750 mL
Capacity – Standard25.36 oz

 

Weights & Dimensions
Weight – Metric644.1 g
Weight – Standard1.42 lb

HIQ Packaging product sourcing guide

18.5 mm 750 ml round bar top: specifications and sourcing support

Liquor packaging needs a consistent bottle, closure and presentation system. Evaluate bottle geometry, capacity, pour performance and decoration together, then confirm component samples against the filling line and intended brand position.

Bottle profile

Compare capacity, glass clarity, base geometry and shelf presence with the product positioning.

Closure and pour

Check the bar-top or stated closure finish for fit, sealing, removal and pouring performance.

Decoration and packing

Plan label application, surface inspection, case packing and supply requirements before launch.

How to evaluate 18.5 mm 750 ml round bar top

Start with the specifications already published on this page. Confirm the dimensions, material, neck finish, closure or dispensing system and sold-by quantity against the product, filling process and distribution plan. Physical samples remain the reliable way to check fit, appearance and performance before commercial ordering.

Information to confirm before ordering

  • Product formulation, temperature, pH or solvent exposure.
  • Filling method, target fill volume and line requirements.
  • Compatible closure, liner, pump or dispensing system.
  • Sample approval, order quantity, decoration and delivery timing.

Industry resource: Glass Packaging Institute

Request specifications and samples

Sourcing guide for 750 ml Round 18.5 Mm Bar Top Chicago

750 ml Round 18.5 Mm Bar Top Chicago is a spirits bottle intended for whiskey, rum, gin, vodka, liqueur and other premium spirits. Buyers should evaluate this item as part of the finished pack, because small differences in neck finish, geometry or wall design can alter line performance. The available configuration includes 750 mL, Glass, and 18.5 mm, subject to confirmation from the current specification sheet and approved sample.

Decisions to make before sampling

Start with the product itself. Confirm whether the item will be filled hot or cold, how much headspace is required, and whether the finished pack will be shipped by parcel, pallet or returnable container. Approve the bottle with the final closure, liner and filling line before artwork is released. The sample review should reproduce the filling, capping, labeling and packing sequence closely enough to reveal interference that a product photograph cannot show.

  • Verify that the listed capacity is the practical fill volume for the intended product, not only a nominal container size.
  • Compare the published opening and neck details with the actual closure, pump, sprayer, liner or dispensing component.
  • Confirm the material grade and color against the final formula, decoration and shelf-presentation requirements.
  • Check the planned label area, print method and artwork tolerances before approving production tooling.
  • Review master-carton count, pallet pattern and any destination-specific labeling or packaging instructions.

Production and quality checks

For this spirits bottle, the important acceptance points include neck finish, glass color, fill height, label alignment and closure sealing. Ask the supplier to identify which properties are checked in routine production and which require a separate laboratory report. Keep the approved sample, signed drawing and final artwork together so a repeat order is measured against one controlled reference.

Labeling and decoration should be tested on the final surface rather than on an unrelated stock item. Changes to resin, glass color, surface treatment or mold can affect adhesion and appearance. A packaging trial should also confirm that the finished pack remains stable during vibration, compression and handling.

Quotation information

Ask for a current technical data sheet and a populated sample so purchasing, quality and production teams review the same version. State whether the requirement is a stock match, a modified existing item or a new custom project. Include the target annual volume and any replenishment pattern because those details affect material planning, tooling and inspection frequency.

Related sourcing options

Review more options in the Liquor & Spirit Bottles category. Related products for comparison include:

For a project-specific recommendation, send the capacity, dimensions, closure system, target quantity and destination through the HIQ Packaging inquiry form.

Related sourcing guide: Read the glass bottle China factory buyer guide for factory selection, sample approval and production-control checks.