Phone:+86 21 84709551
Monday to Friday: 8AM - 6PM

1 Liter Glass Round Liquor Bottle
1 Liter Glass Round Liquor Bottle
Flint glass construction.
28-350 neck finish (cap not included).
Sold as a pallet of 924 bottles.
1 Liter Glass Round Liquor Bottle
Flint glass construction.
28-350 neck finish (cap not included).
Sold as a pallet of 924 bottles.
- Pallet Qty924
- Capacity1 L
- Material GroupGlass
- Material TypeGlass – Type III
- ColorFlint
- ShapeRound
- Neck FinishTamper Evident, KERR
- Diameter3.4618 in
- Height11.846 in
- Gram Weight480
- Cap Size28-350
- 1 Liter Glass Round Liquor Bottle
- 28-350 neck finish
- Flint glass construction
HIQ Packaging product sourcing guide
1 liter glass round liquor bottle: specifications and sourcing support
Liquor packaging needs a consistent bottle, closure and presentation system. Evaluate bottle geometry, capacity, pour performance and decoration together, then confirm component samples against the filling line and intended brand position.
Bottle profile
Compare capacity, glass clarity, base geometry and shelf presence with the product positioning.
Closure and pour
Check the bar-top or stated closure finish for fit, sealing, removal and pouring performance.
Decoration and packing
Plan label application, surface inspection, case packing and supply requirements before launch.
How to evaluate 1 liter glass round liquor bottle
Start with the specifications already published on this page. Confirm the dimensions, material, neck finish, closure or dispensing system and sold-by quantity against the product, filling process and distribution plan. Physical samples remain the reliable way to check fit, appearance and performance before commercial ordering.
Information to confirm before ordering
- Product formulation, temperature, pH or solvent exposure.
- Filling method, target fill volume and line requirements.
- Compatible closure, liner, pump or dispensing system.
- Sample approval, order quantity, decoration and delivery timing.
Continue comparing packaging components
Industry resource: Glass Packaging Institute
Sourcing guide for 1 Liter Glass Round Liquor Bottle
1 Liter Glass Round Liquor Bottle is a spirits bottle intended for whiskey, rum, gin, vodka, liqueur and other premium spirits. The published specification is the starting point for a technical review, not a substitute for a line trial or approved physical sample. The available configuration includes 1 Liter, Glass, and 750, subject to confirmation from the current specification sheet and approved sample.
Decisions to make before sampling
Start with the product itself. Confirm whether the item will be filled hot or cold, how much headspace is required, and whether the finished pack will be shipped by parcel, pallet or returnable container. Approve the bottle with the final closure, liner and filling line before artwork is released. The sample review should reproduce the filling, capping, labeling and packing sequence closely enough to reveal interference that a product photograph cannot show.
- Verify that the listed capacity is the practical fill volume for the intended product, not only a nominal container size.
- Compare the published opening and neck details with the actual closure, pump, sprayer, liner or dispensing component.
- Confirm the material grade and color against the final formula, decoration and shelf-presentation requirements.
- Check the planned label area, print method and artwork tolerances before approving production tooling.
- Review master-carton count, pallet pattern and any destination-specific labeling or packaging instructions.
Production and quality checks
For this spirits bottle, the important acceptance points include neck finish, glass color, fill height, label alignment and closure sealing. Ask the supplier to identify which properties are checked in routine production and which require a separate laboratory report. Keep the approved sample, signed drawing and final artwork together so a repeat order is measured against one controlled reference.
Labeling and decoration should be tested on the final surface rather than on an unrelated stock item. Changes to resin, glass color, surface treatment or mold can affect adhesion and appearance. A packaging trial should also confirm that the finished pack remains stable during vibration, compression and handling.
Quotation information
Include artwork status, required decoration, expected order frequency and receiving requirements when requesting current pricing. State whether the requirement is a stock match, a modified existing item or a new custom project. Include the target annual volume and any replenishment pattern because those details affect material planning, tooling and inspection frequency.
Related sourcing options
Review more options in the Liquor & Spirit Bottles category. Related products for comparison include:
- 750 ml Clear Glass Handleware Moonshine Jug 21.5 mm Bar Top Neck Finish with Glossy Dark Wood Varnish Closure
- 750 ml Clear Glass Round Jersey Liquor Bottle 21.5 mm Bar Top Neck Finish with Glossy Dark Wood Varnish Closure
For a project-specific recommendation, send the capacity, dimensions, closure system, target quantity and destination through the HIQ Packaging inquiry form.
Related sourcing guide: Read the glass bottle China factory buyer guide for factory selection, sample approval and production-control checks.





Reviews
There are no reviews yet.