Phone:+86 21 84709551
Monday to Friday: 8AM - 6PM

500 ml Clear PET Plastic Bullet Round Bottle 38 DBJ Neck Finish
This 500 ml (16 oz) clear PET plastic bullet round bottle has a 38 DBJ neck finish. This bottle is great for packaging cold press juice, iced tea & cold brewed coffee, or milk. It is specifically designed and can only be paired with DBJ closures which are tamper-evident screw caps used as closures on most single-use dairy, juice, and other beverage bottles, see our related products below.
Specifications
| Country of Origin | China |
|---|---|
| Base Diameter | 2.50″ |
| Color | Clear |
| Neck Size (MM) | 38.000000 |
| Standard Pallet Qty | 3600 |
| Total Height | 7.67″ |
| Capacity | 500 ML |
| Material | PET |
| Neck Finish | 38 DBJ |
| Sold By | Case |
| Style | Bullet |
HIQ Packaging product sourcing guide
500 ml clear pet bullet round bottle: specifications and sourcing support
Bottle selection works best when capacity, product compatibility and closure fit are confirmed together. Use the published dimensions and neck finish as the starting point, then review filling method, material, decoration and case-pack requirements before sampling. HIQ Packaging can help connect the container with practical stock sourcing, component matching and production planning.
Product compatibility
Confirm how the formula, temperature and storage conditions interact with the bottle material, visual finish and required barrier.
Closure and filling
Match the published neck finish with compatible closures, liners and filling equipment before approving a sample.
Production planning
Review decoration, packing density, order volume and repeat-supply requirements as one packaging system.
How to evaluate 500 ml clear pet bullet round bottle
Start with the specifications already published on this page. Confirm the dimensions, material, neck finish, closure or dispensing system and sold-by quantity against the product, filling process and distribution plan. Physical samples remain the reliable way to check fit, appearance and performance before commercial ordering.
Information to confirm before ordering
- Product formulation, temperature, pH or solvent exposure.
- Filling method, target fill volume and line requirements.
- Compatible closure, liner, pump or dispensing system.
- Sample approval, order quantity, decoration and delivery timing.
Continue comparing packaging components
Industry resource: Plastics Industry Association
Sourcing guide for 500 ml Clear PET Plastic Bullet Round Bottle 38 Dbj Neck Finish
500 ml Clear PET Plastic Bullet Round Bottle 38 Dbj Neck Finish is a plastic container intended for personal care, household chemicals, food, laboratory and industrial products. Buyers should evaluate this item as part of the finished pack, because small differences in neck finish, geometry or wall design can alter line performance. The available configuration includes 500 ML, PET, and 38, subject to confirmation from the current specification sheet and approved sample.
Decisions to make before sampling
Start with the product itself. Confirm whether the item will be filled hot or cold, how much headspace is required, and whether the finished pack will be shipped by parcel, pallet or returnable container. Review resin grade, wall distribution, drop performance and chemical compatibility against the intended contents. The sample review should reproduce the filling, capping, labeling and packing sequence closely enough to reveal interference that a product photograph cannot show.
- Verify that the listed capacity is the practical fill volume for the intended product, not only a nominal container size.
- Compare the published opening and neck details with the actual closure, pump, sprayer, liner or dispensing component.
- Confirm the material grade and color against the final formula, decoration and shelf-presentation requirements.
- Check the planned label area, print method and artwork tolerances before approving production tooling.
- Review master-carton count, pallet pattern and any destination-specific labeling or packaging instructions.
Production and quality checks
For this plastic container, the important acceptance points include neck finish, wall thickness, color, leak performance, label fit and carton protection. Ask the supplier to identify which properties are checked in routine production and which require a separate laboratory report. Keep the approved sample, signed drawing and final artwork together so a repeat order is measured against one controlled reference.
Labeling and decoration should be tested on the final surface rather than on an unrelated stock item. Changes to resin, glass color, surface treatment or mold can affect adhesion and appearance. A packaging trial should also confirm that the finished pack remains stable during vibration, compression and handling.
Quotation information
Ask for a current technical data sheet and a populated sample so purchasing, quality and production teams review the same version. State whether the requirement is a stock match, a modified existing item or a new custom project. Include the target annual volume and any replenishment pattern because those details affect material planning, tooling and inspection frequency.
Related sourcing options
Review more options in the Plastic Bottles & Jars category. Related products for comparison include:
- 32 oz white HDPE plastic single wall canister with 89-400 neck finish
- 48 oz clear PET plastic square grip container
For a project-specific recommendation, send the capacity, dimensions, closure system, target quantity and destination through the HIQ Packaging inquiry form.
Related sourcing guide: Read the plastic bottle China factory buyer guide for factory selection, sample approval and production-control checks.





Reviews
There are no reviews yet.